Simplified 1S Series Charging Board for LiPo Batteries

This multi-battery charging board allows you to conveniently charge 1-6 1S LiPo batteries simultaneously using a standard charger. The key features are as follows:

1. Charge 1-6 1S LiPo batteries at the same time: The board enables you to charge multiple 1S LiPo batteries concurrently, saving time and effort.

2. Turn the knob to select the number of batteries: Simply turn the knob to the corresponding position based on the number of batteries you need to charge, making the process straightforward.

3. Storage charge and discharge 1S LiPo batteries: The board supports charging and discharging of 1S LiPo batteries, providing versatility in battery management.

4. Pre-soldered PH2.0 and BT2.0 connectors: The board comes with pre-soldered connectors, eliminating the need for additional wiring setup.

5. The added fuse makes the board even safer: The inclusion of a fuse enhances the safety aspect of the charging process.

Operation Instructions: 1. Turn the knob to the position that matches the number of batteries you will be charging. 2. Plug in the batteries in sequence, starting from "1S" and progressing to "2S," "3S," and so on. 3. Connect the series board to the charger using the appropriate cables.

Example: If you have 3 whoop batteries to charge, follow these steps: 1. Turn the knob to the "3S" position. 2. Plug the batteries into the 1S, 2S, and 3S ports in sequence. 3. Connect the board to the charger using the balance cable and XT60 cable.

Warnings: 1. This is a series board, not a parallel board. Ensure your charger settings match the number of batteries being charged. 2. All batteries should have the same specifications, including capacity, type, and brand. 3. Never leave the board unattended while charging or discharging. 4. Do not exceed the maximum charging current of 1.5A, even though the fuse is rated for 5A. 5. Do not plug in both PH2.0 and BT2.0 batteries in the same port.

Specifications: Dimensions: 73 x 39 x 33 mm Weight: 49g Battery Type: PH2.0 & BT2.0 Max Charging Current: 1.5A Working Voltage: Less than 30V

product information: